A/T - Harsh Upshifts, Updated AGS Software
Group 24Automatic Transmission
Bulletin Number
24 05 98
Woodcliff Lake, NJ
September 1998
Product Engineering
SUBJECT:
Updated Transmission Software for AGS Version 8.60.2
MODEL:
E38 - 740i/iLA produced 9/97 - 3/98 E39 - 540iA produced 9/97 - 3/98
Situation:
A CUSTOMER COMPLAINT pertaining to the following may be encountered:
^ Transmission shifts harsh on 1-2 upshifts under light acceleration, especially in the "S" (Sport) mode.
^ "Trans. Failsafe Prog" was indicated in the instrument cluster, any of the following faults may be set in the AGS fault memory:
FC1, FC2, FC3, FC4 or FC5
Cause:
Software calibration and software diagnostic routines.
Correction:
If a CUSTOMER COMPLAINT is received and the AGS Control Module software number is as indicated below, the AGS control module should be reprogrammed with DIS version 14.0 or higher:
Warranty Information:
Part and labor are reimbursable under the terms of the BMW New Car Limited Warranty of 4 years/50,000 miles.
Defect Code: 24 00 95 61 00
Labor Operation: 24 61 700
Labor Allowance: E38 - 6 FRU
E39 - 7 FRU