Defect Code 07

Defect Code 07:

*D* Defect code memory: 07 Evaporator sensor:

Explanation: This defect code is stored when there is a short to ground, to plus or a break at connector blue Pin 9.

Effect of defect: If the defect is a current defect, a substitute value of -5 °C is used.

Possible cause: Voltage supply (approx.. 5 V) not OK., wire or evaporator sensor defective.

Troubleshooting: Check voltage supply (approx.. 5 V with temperature sensor disconnected) as well as wires and repair or renew component as required.