Crankshaft Pulley Torque
M73| Dampner with pulley | Thread | Tightening Specs. Replace Screw | Measure |
| Jointing torque | M18 x 1.5 | Replace Screw | 100 Nm |
| Torque angle | Step # 1 | 60 degs. | |
| Torque angle | Step # 2 | 60 degs. |
| Dampner with pulley | Thread | Tightening Specs. Replace Screw | Measure |
| Jointing torque | M18 x 1.5 | Replace Screw | 100 Nm |
| Torque angle | Step # 1 | 60 degs. | |
| Torque angle | Step # 2 | 60 degs. |