Assembling and Disassembling Cylinder Head

(cylinder head removed)
If necessary, remove coolant thermostat.





Note: If special tools (assembly fixtures) have been supplied, screw on special tool 11 1 442.





Secure special tool 11 1 065 to special tool 00 1 490.
Provide special tools for disassembling cylinder head:
- Special tool 11 1 071
- Special tool 11 1 067
- Special tool 11 0 192





- Special tool 11 1 045
- Special tool 11 0 342
- Special tool 11 0 343
- Special tool 11 0 345
- Special tool 11 1 441
Assemble special tools.





Note: Do not install special tool 11 1 441 (locating board) in special tool 11 1 065 at this stage.





Fit cylinder head to special tool 11 1 065 and secure with two screws.
Unfasten temperature sensor and pull branch flange backwards to( remove. Remove all valve stem seals.