Rear Impulse Sensors

Important: Note "General Information", refer to General Data found in Brakes and Traction Control, Description and Operation.

Removing rear wheel, refer to Steering and Suspension





Open connector housing (1), pull plug connector (2) out of bracket and disconnect. Pull cable out of brackets on swinging arm.

Installation:
Ensure proper locking of the plug connector and proper seating of the cable in the brackets.





Unfasten socket head cap screw (1) and pull ABS impulse sensor out of hole.

Installation:
Clean hole for impulse sensor and grease with lubricating grease Staburags NBU 12/K or equivalent.