Temperature Intervention

Stratification (Temperature Intervention) E38 only







The mixing flaps will open less in the direction of heat for blending air as the solar influence increases. The graph below represents the influence of the solar sensor on the stratification flap settings.

To illustrate the influence of the solar sensor on the mixing flap position, the Y factor remains constant at 20%.

With a solar influence of 0% curve "A" is adopted for the various outside temperatures. As the outside temperature decreases, the mixing flap is moved toward the warmer setting blending more heat.

With a solar influence of 100% curve "B" is adopted for the various outside temperatures. As the outside temperature decreases, the mixing flap is still moved toward the warmer setting but it does not move as far. The solar influence is compensating to provide the same comfort level.

With the mixing flap thumbwheel at 100 or 0% (full hot or cold), the flaps are in the default position and there will be no solar influence.

The left and right mixing flaps are controlled independently based on the individual settings and left and right solar sensor inputs.