Engine Lubrication: Testing and Inspection
Note: To check the engine oil pressure, remove oil pressure switch, install and connect special tools.
Unscrew oil filter cap, the engine oil flows out of the oil filter housing into the oil sump.
Installation:
Replace sealing ring.
Tightening Torque, refer to Engine, Specifications.
Remove oil pressure switch.
Installation:
Tightening Torque, refer to Engine, Specifications.
Install special tool 11 4 050 with sealing ring (1) in place of oil pressure switch.
Check engine oil pressure with DIS Tester
Attach special tool 13 6 054 with sealing ring (1) and special tool 13 6 051 and connect to DIS Tester.
Check engine oil pressure with pressure gauge
Install special tool 13 3 063 and special tool 13 3 061 (pressure gauge).
Start engine and check engine oil pressure.
Specified value, refer to Engine, Specifications