New Air Line and Screw Connections

Assembly Instructions For A New Tube (air Line) And New Screw Connection

Caution!
- The tubes must not be cut!
- Do not dismantle the screw connection!






Tighten complete new screw connection (comprising toothed ring (1) cap screw (2) and assembly plug (3), in air spring strut and/or distributor block and/or tube (of spring to air tank)

Tightening Torque: 2.0 ± 0.5 Nm
Remove assembly plug (3).






Slide new tube (4) in as far as bulge (4.1).
(2) Cap screw
(5) Air spring strut and/or distributor block and/or tube (from spring to air tank)