Condenser Fan: Service and Repair

Removing and Installing/Replacing Complete Supplementary Fan (with fan cowl)


1. Remove complete front bumper, Removal and Replacement






2. Disconnect plug connection ( 1 ). Turn plug ( 2 ) in direction of arrow and remove from air duct at front ( 4 ). Feed cable loom ( 3 ) out of fixtures.






3. Release screws ( 1 ) and remove air duct at front ( 2 ).

Note: When installing, ensure Bowden cable guide ( 3 ) is correctly seated.






4. Unscrew nuts ( 1 ). Remove supplementary fan complete with fan cowl ( 2 ) in direction of arrow.
5. Install in reverse order of removal.