Engine Lubrication: Service and Repair

Change engine oil and oil filter.





Note: Do not damage main flow oil filter cover. Only open and tighten with socket wrench.

Unfasten main flow oil filter cover - engine oil now flows back into oil pan.

Installation:
Tightening torque, refer to Engine, Specifications.





Remove oil filter from oil filter cover.

Installation:
Note direction of installation of oil filter insert Oil filter insert must locate in oil filter cover.






Installation:
Replace sealing ring and coat with oil.





After draining oil from oil-filter housing, unscrew oil drain plug or draw out oil with a vacuum unit.

Installation:
Replace sealing ring.
Tightening torque, refer to Engine, Specifications.
Switch on engine and run at idle until oil indicator lamp goes out.
Stop engine and check oil level.

Note: Position car on a flat, horizontal surface.