Digital Input Signals

Digital Input Signals




The normal power-up and KL 50 inputs to the IKE processor:
- Terminal R
- Terminal 15
- Terminal 50
Various functions are dependent on the ignition switch positions.

Steering column switch - This switch is used to call up BC functions into the cluster matrix.

Oil Pressure Switch - This status is transmitted to the LCM over the I-BUS. The LCM compares the switch status with engine speed to evaluate oil pressure. IKE can store faults with the oil pressure switch and circuit.

Parking Brake Switch - Switch status is transmitted to the LCM for evaluation

Trip Odometer Reset - The left button on the cluster is used to reset the trip mileage if the key is on and display mileage if the key is off.