Catalytic Converter: Service and Repair

Removing and installing/replacing left or right catalytic converter
Remove complete exhaust system.

Warning: Scalding hazard!

These tasks should only be carried out on an exhaust system that has cooled down!





Carry over length of new catalytic converter to remove catalytic converter and mark cutting points.

Cut through exhaust pipes between catalytic converter and center muffler at marked points with a parting-off grinder and deburr.





Connect new catalytic converter and center muffler by means of clamping sleeves.

Installation:
Nuts point downwards.

Installation:





Align exhaust system and clamping sleeves in such a way that there is sufficient spacing to adjoining components.