Brake-Light Switch, Replacement

Remove bottom left footwell trim panel,
Disconnect connector.





Depress brake pedal as far as possible, using pedal support if necessary.





1. Pull tappet and sleeve forward completely.
2. Press together clips and pull back switch.

Installation:
Adjustment is made automatically after installation.
Slowly release pedal to neutral position.

Caution!
Adjustment of the switch can be changed if brake pedal springs back.
Carry out operational check.





Pin allocation of brake light switch
1. Terminal 31
2. BEML
3. BL ON
4. Terminal R





Circuit diagram for brake light switch.