Replacing Front Stabilizer

Replacing Front Stabilizer


M3 model only:
Remove front underbody protection.





Release stabilizer link (1) on left and right of stabilizer bar (2) grip with open-end wrench.

Installation:
Replace self-locking nuts.
Stabilizer Link to Stabilizer 65 Nm





Release retaining bracket on left and right.
Remove stabilizer.

Installation:
Rubber mount, retaining bracket and stabilizer bar free of grease.
Open end of rubber mount faces downwards.
Wet retaining bracket with low-surface-tension water.
Replace self-locking nuts.
Holder to Front Axle Carrier on Body 22 Nm