Replacing Front Stabilizer

Replacing Front Stabilizer






Release stabilizer link (1) on left and right of stabilizer bar (2) grip with open-end wrench.

Installation:
Replace self-locking nuts.
Stabilizer Link to Stabilizer 65 Nm

Remove underbody protection at front and cooling air ducts for brake on left and right.





Release retaining bracket on left and right.
Remove stabilizer.

Installation:
Rubber mount, retaining bracket and stabilizer bar free of grease.
Open side of rubber mount at an angle at front.
Wet retaining bracket with low-surface-tension water.
Replace self-locking nuts.
Holder to Front Axle Carrier or Body 22 Nm