Removal and Installation

REMOVAL AND INSTALLATION:

Safety instructions for handling vehicle battery. Service Precautions

CAUTION:

- Do not disconnect the battery when the engine is running. If you do so, the ensuing voltage surge will damage the vehicle's on-board electronics.

- Do not make any modifications in the wires to the positive terminal. If you do so, the protective function of the safety battery terminal is no longer ensured. Repair and disposal must be performed by trained technicians only.

When removing the battery, disconnect the cable on the negative terminal first, then the cable on the positive terminal. Loosen the center adjusting screw on the battery retaining strap (use the screwdriver included with the on-board tool kit) and disconnect the strap.

When installing a battery, connect the positive terminal first, then connect the negative terminal.

CAUTION: When installing a battery, be sure that it is mounted properly and that the retaining bracket is installed with the center adjustment screw. If this is not done, the battery will not be adequately secured in case of an accident.