Automatic Transmission/Transaxle: Testing and Inspection
Checking Hydraulic Pressure Values
Connect hose 24 0 021 to pressure gage 13 3 061.
Unscrew and remove plug (1) from the converter bell housing to check the main pressure.
Caution: Inch threads.
Screw in and secure special tool 24 5 190 (adapter).
Screw pipe elbow 24 0 140 to adapter and connect with hose 24 0 021.
Start engine.
Selector lever in "P" or "N". Engine speed > 1500 rpm.
Read main pressure on pressure gage.
Main pressure specification: 9.6 ... 10.5 bar.