Replacing Rear Light (Saloon/Sedan)

Removing And Installing/Replacing Left Or Right Rear Light (Saloon/Sedan)

Up to 09/2000:
Remove socket housing for rear light.







Release nuts and remove outer rear light.

From 09/2000:







Disconnect plug connection (1).
Release nuts (2) and remove outer rear light.

All:
Only replace:
If necessary, convert or replace bulbs.

Installation:
Make sure rear light seal is correctly seated, replace if necessary.
Make sure there is a uniform gap all round between rear light and body side panel, gap approx. 2 mm.