Adjusting Front Axle (With KDS) (Basis)

Adjusting front axle (with KDS) (Basis)

Caution: On cars equipped with Electronic Damper Control, it is essential after wheel alignment to perform a "steering angle check/adjustment" with the BMW Diagnosis System.






Adjust toe and toe-difference angle. Set steering gear to straight-ahead position (marking on case and steering shaft must be aligned).





Loosen lock nut (1) on track rod. Adjust camber of wheel to nominal value by twisting the track rod (2), refer to Technical Data. Specifications


Installation:

Ensure that ball joint is not twisted. Tightening Torque, refer to Specifications