Selector Lever Switch

Selector lever switch
The AGS control unit detects the selector lever position by way of a switch on the transmission. This switch converts the current selector lever position into a code.
This selector lever code is transferred to the AGS control unit via four lines (L1-L4).

Selector lever position L1 to L4 (0 = open, 1= U-batt)
P L1=1, L2=1, L3=0, L4=1
R L1=1, L2=0, L3=0, L4=0
N L1=1, L2=1, L3=1, L4=0
D L1=0, L2=0, L3=1, L4=0
4 L1=0, L2=0, L3=0, L4=1
3 L1=0, L2=0, L3=1, L4=1
2 L1=1, L2=0, L3=1, L4=1