Airbag Unit Up to 03/2002

WARNING: Note airbag safety instructions! Incorrect handling can activate airbag and result in injury. Disconnect negative battery lead. Service Precautions







- Unfasten both screws (torx T 27).

Installation:
- Do not pinch wires.

- Tighten to: 8 Nm.







- Remove connector from:

Squib (1) Horn (2)
Steering wheel switch (3)

- Remove airbag unit.


CAUTION! Airbag unit must be placed with padded cushion facing upward (luggage compartment).







- Turn steering wheel to straight-ahead position (markings on steering gear and steering spindle aligned).

- Unscrew bolt. Mark position of steering wheel relative to steering spindle. Pull off steering wheel.


CAUTION! When screw is unfastened, torsion spring (F) cuts in which secures contact ring in central setting. On no account must the steering wheel be moved if screw is not tightened. Contact ring will be damaged!

Installation:

- Tighten to: 8 Nm.







Installation:
- Retaining pin (1) must engage in recess (2).







- Adjust contact ring if necessary:
- Press down spring (F).
- Determine centre position of contact ring by halving the total number of turns. Ensure marks are aligned (1).
- Release spring (F).