Replacing Seat Cover on Front Seat (Normal/Manual)

Replacing Seat Cover On Left Or Right Front Seat (Normal/Manual)

Removal of complete seat cushion:
Remove both seat rails.
Remove inside cover.
Remove actuating unit.








Lift left/right seat cover out of cover clips.

Installation Note: End of cover must not be folded or frayed (function error).







Remove cable (1) for seatbelt tensioner from inside seat cover (2).







Model with lumbar supports:
Extract cable (1) from seat cover (2).







Version with seat heating:
Unfasten cable tie (1) and remove connector (2).

Model with lumbar supports:
Do not unfasten cable tie (3) in region of hose reinforcement.







Disconnect seat cover from all cover clips (1) and remove together with foam rubber section (support).


NOTE: The operation "Removing complete seat cushion" ends here.


Replacement of support:







Cut through all clips and remove seat cover from support (foam rubber section).







Installation:
Bend new clips (2) with special tool 52 0 050.
1 Support
2 Clip
3 Trim thread in support
4 Trim thread in cover
5 Cover







Only passenger seat (replacement of support):

Installation:
Fit new sensor mat.
Mark out points (2) on sensor mat (1) for passenger seat allocation identification on liner and attach to foam rubber.
Guide connector through the bore (3).
Folds as illustrated in diagram are not permitted!


NOTE: The operation "Replacing support" ends here.


Only passenger seat (replacement of sensor mat):







Remove sensor mat (1) for passenger seat allocation identification, ensuring that no large areas of foam at damaged marked points (2) (malfunction of passenger seat allocation identification). Guide connector through the bore (3).
Folds as illustrated in diagram are not permitted!


NOTE: The operation "Replacing sensor mat" ends here.







Replacement of seat cover:
Remove trim threads (1) from seat cover. Cut new seat cover to size and insert trim threads (1).