Replacing Bottom Panel on Front Seat Backrest (Luxury Seat)

Removing And Installing/Replacing Bottom Rear Panel On Front Seat Backrest (Luxury Seat)


NOTE:
This document is also applicable to L7 driver's seat with video system in rear compartment
Head-rest must be moved as far forwards as possible.
Remove top rear panel.







Pull inside edge of rear panel inwards I backwards (1) and knock firmly inwards (2) (spring disconnected at bottom inside edge).







Press inside edge of rear panel outwards (3) and pull outwards and backwards (4) (spring disconnected at bottom outside edge).
Lift rear panel upwards/backwards (5).







Installation:
The springs must be correctly located in the rear panel supports and must not be bent.
If necessary, replace defective clips.