Gearshift Switch

Selector lever switch

The EGS control unit detects the selector lever position by way of a switch on the transmission. This switch converts the current selector lever position into a code. This selector lever code is transferred via four lines (L1-L4) to the EGS control unit.

Selector lever position
L1 to L4 (0 = open, 1= U-batt)

P
L1 =1, L2 = 1, L3 = 0, L4 =1

R
L1 =1, L2 = 0, L3 = 0, L4 =0

N
L1 =1, L2 = 1, L3 = 1, L4 =0

D
L1 =0, L2 = 0, L3 = 1, L4 =0

4 (3)
L1 =0, L2 = 0, L3 = 0, L4 =1

3 (2)
L1 =0, L2 = 0, L3 = 1, L4 =1

2 (1)
L1 =1, L2 = 0, L3 = 1, L4 =1