Printing Vehicle Information

After automatic identification of the vehicle has taken place by the Win CKM software, a listing of the vehicles default settings can be printed. Default settings are settings that are preset for that model by the factory. A printout of the default settings as well as the final settings can be printed out for the customer. To print:





-- Select "95 Print List" from the menu then right arrow (refers to the right facing green arrow at the bottom of the screen).

Turn the vehicle key off. Disconnect the unit from the vehicle





-- Attach the blue USB cable to the USB port on the Laptop (# 16 page 6 of Users Guide).





-- The other end of the USB cable should be attached to the printer cable connector on the printer. Note- always attach a printer cable to the printer with the printer power turned off. However, attaching the USB end of the printer cable to the Laptop can be accomplished with the Laptop turned on. The software will recognize the cable automatically

-- Select "Yes"

-- Select the printer from the printer setup box

-- Select "OK".