Rear
Rear Disc| M models must not be machined ! | ||
| Min. Thickness (MIN TH) is stamped in brake shell. | Ventilated | 17.4 |
| Solid | 8.4 | |
| M models | Ventilated | 18.4mm |
| Max. Machining Limit Per Friction Side | 0.8 | |
| Max. Thickness Deviation (Parallelism) | 0.02 | |
| Max. Axial Runout Measured at largest diameter of braking surface. | Disc Installed | 0.2 |
| Disc Removed | 0.04 | |
| Surface Finish | 0.5 to 3.5 |