Removing and Installing/Replacing Left Trunk Wheel Housing Trim (Z3 Roadster, M Roadster)

51 47 151 Removing And Installing/Replacing Left Trunk Wheel Housing Trim (Z3 roadster, M roadster)

Necessary preliminary tasks:
- If necessary, remove first aid kit.
- Remove floor mat.

Without EH convertible top:
- Remove socket housing for left rear light.







Version without electrohydraulic convertible top, without battery in the luggage compartment:
- Release fastener (1).
- If necessary, remove holder (2) for first aid kit.
- Release clip (3).
- Remove luggage compartment wheel arch trim (4).

Installation:
Insert luggage compartment wheel arch trim (4) at bottom into rear panel trim (5).

Version with battery in luggage compartment:
- Release clips (1).
- Remove luggage compartment wheel arch trim (2).







Installation:
Insert luggage compartment wheel arch trim (2) at bottom into rear panel trim (3) and storage compartment (4).







Version with EH convertible top:
- Release fastener (1).
- Release clip (2).
- Feed out luggage compartment wheel arch trim (3) at socket housing (4) and remove.

Installation:
Insert luggage compartment wheel arch trim (3) behind socket housing (4) and if necessary below storage compartment.