Removing and Installing or Replacing Foot Pedal

Warning!: Always replace dismantled foot pedal with new part. Retaining clips on old part may be damaged. Foot pedal can then slide out of steel plate. This means there is a risk of accident!





Press down carpet.
Press locking tab (1) forwards.

Installation:
Fold locking tab (1) upwards until it engages.





Bend retaining clips forwards and lever out foot pedal upwards.





Installation:
Insert foot pedal in floor with pocket on steel plate.
To be absolutely sure, check that retaining clips have snapped into place.





Twist foot pedal (1) until linkage lug (2) on accelerator pedal engages in recess (3).
Remove foot pedal from accelerator pedal.

Installation:
Apply light coat of suitable grease to anti-friction surface of accelerator pedal.