Removing and Installing/Replacing Trim For Preselector Knob

51 16 210 Removing And Installing/Replacing Trim For Preselector Knob







NOTE:
- Apply handbrake and move preselector knob (1) max. to rear (risk of damage to interior mirror).
- Do not twist preselector knob (1) when removing; otherwise turning lock in knob (1) will be sheared off.
- Pull off preselector knob (1) with a forceful jerk.

Installation:
Fit preselector knob (1) onto selector lever, align and press down until it can be felt to snap into place.







Installation:
Push rubber gaiter (1) down until groove (2) is fully exposed.







Remove trim (1) with rubber gaiter (2) from center console.







Disconnect plug connections (1) and remove trim (2).