Air Bag Control Module: Service and Repair

Removing And Installing Airbag Control Unit


WARNING:
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Disconnect negative lead from body and cover.
Check system after installation.







Vehicle with rear compartment fan:
Remove complete rear compartment fan.
Release screws (1) and remove cover (2).







Disconnect plug connection (1).
Release nuts (2) and lift off airbag control unit (3).

Installation Note:
Ensure grounding cable (4) is correctly laid.
Observe tightening torque.







Vehicle without rear compartment fan:
Remove fresh air grill in footwell.
Unclip carpet on left and right.
Disconnect plug connection (1).
Release nuts (2) with special tool 11 4 190.
Raise airbag control unit (3) slightly and pull out.

Installation Note:
Ensure grounding cable is correctly laid.
Observe tightening torque.