Removing and Installing Impact Sensor For Side Airbag (MRS 4)

Removing And Installing Impact Sensor For Left Or Right Side Airbag (Multiple Restraint System 4)


WARNING:
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.


Turn ignition key to 0 position.
Remove left or right front seat.
Remove entrance cover strip.







Lift carpet floor (1) in area of front seat.
Disconnect plug connection (2) in direction of arrow.
Release screws (3) and remove impact sensor for side airbag (4).

Installation Note:
Arrow on impact sensor for side airbag (4) must point to sill.
Observe tightening torque.