Exhaust System: Service and Repair

Removing And Installing Complete Exhaust System

Special Tools Required:
31 2 220 support tool

Warning! Scalding hazard!

Only perform this work after engine has cooled down.





Support exhaust system with jack and special tool 31 2 220 and secure against falling out.






Release nuts (1) and remove connecting plate (2).

Installation:
Replace self-locking nuts.
Coat threads with copper paste.





Installation:
Check seals (1), replace if necessary.





Release screw.





Removal of exhaust system must be carried out with assistance of a second person.
Detach rubber mounts (1) from bracket.
Lower exhaust system and remove.
If necessary, remove vibration damper (2) and install on new rear muffler.