Removing and Installing/Replacing Complete A/C Compressor
Removing And Installing/Replacing Complete A/C Compressor
Caution!
Risk of damage!
Follow instructions for compressor replacement without tail.
NOTE:
A/C system is drawn off.
Remove A/C compressor drive belt.
Disconnect plug connection (1).
Release screws (2) and detach lines (3) in direction of arrow.
Installation:
Replace sealing rings.
Observe tightening torque, 64 52 1AZ.
Loosen screws (1).
NOTE: Tape off front axle support as illustrated with fabric adhesive tape (1).
Unscrew nut (2).
Remove line (3) and lay downwards.
NOTE: Secure A/C compressor (5) against falling out.
Release screw (4) and remove A/C compressor (5) in direction of arrow.