Replacing Reflecting Tail Light on Rear Bumper

Removing And Installing/Replacing Reflecting Tail Light On Rear Bumper (Coupe, Convertible)







NOTE: Once the bumper (1) has been pressed on, the reflecting tail light (2) is forced out by spring force.


Press bumper (1) in center upwards and remove reflecting tail light (2) towards rear/top.

Installation Note: Insert reflecting tail light (2) at bottom into bumper (1) and press top/center against reflecting tail light (2) until it snaps into place in bumper (1).







Installation Note: Fixtures (1) and springs (2) on reflecting tail light (3) must not be damaged.







Installation Note: Fixtures (1) in bumper (2) must not be damaged.