Replacing Lock For Rear Seat Backrest (Through-Loading)

Removing And Installing/Replacing Lock For Rear Seat Backrest (Through-Loading System), Left







Unlock rear seat backrest and fold down.
Unclip Bowden cable from mounting (1).
Unfasten screws (2).


NOTE: If rear seat backrest cannot be unlocked release screws (2) and feed lock out of installation opening with backrest.







Pull lock (1) out of installation opening a little and unclip
Bowden cable (2).
Remove lock completely from installation opening.

Installation:
Catches (2) on lock must not be damaged.
Bowden cable must be anchored correctly in catches (2).







Slide guide lug (1) of lock into opening (2).


NOTE:
Adjustment of lock:
- Slacken screws
- Firmly push engaged backrest back
- Tighten down screws