Version 2

Remove / Replacing Rear Stabilizer Bar





Remove spare wheel (1) from spare wheel recess.
Release screw (2).





Release screws (1) and remove spare wheel recess (2).





Release screws (1) on bearing pedestal stabilizer link.





Release screws (1).
Remove stabilizer bar with rubber mounts from control arm at top and from rear axle carrier.

Note: For installation and removal, remove bearing pedestal if necessary.

Installation:
Stabilizer bar and rubber mount free of grease.

Coat retaining bracket with Circo light.

Front rubber mount on rear muffler, release hexagon nuts (2).





Rear rubber mount on rear muffler, release hexagon nuts (1).
Feed out stabilizer bar over lowered rear muffler (2).