Cushion and Backrest

Removing and Installing / Replacing Left or Right Backrest (Load Through System)

- Remove side section on left or right rear-seat backrest




- Unfasten screw (1) and remove center mount (2).

Installation:
- Install center mount (2) properly in guide (3).




- Unfasten bolt and (1) take off outer mount (2).

Installation:
- Install outer mount (2) properly in guide (3).

Left backrest:
- Position backrest vertically (do not engage) and pull out upward.

Right backrest:
- Pull out backrest upward.




Left backrest only:
Installation:
- Rod (1) must be facing downward.