Removing and Installing/Replacing Eject Box

Removing And Installing/Replacing Eject Box

Remove fresh air grill in footwell.







Remove screws (1) and (2).
Raise center armrest.







Disconnect all plug connections and remove center armrest.







Pull sliding carriage apart fully and release screws.







Installation:
Place washers (3) on outer-lying bores.
Insert centering pin (2) of carriage in bores (1).







Push sliding carriage completely together and insert cable with connectors.







Press clips apart and press eject box forwards to remove.







NOTE: Clips (1) without eject box for better representation.