Removal and Replacement

51 11 000 Removing And Installing Complete Front Bumper







Unfasten left/ right screws and lift out wheel arch finishers (1) from side.







Lever out expansion rivets on left/right and remove grill (1).







Release screws on impact absorber on left/right.

Installation:
2AZ Bumper and bracket to impact absorber
M10 41 Nm

Version with Park Distance Control (PDC) and/or fog lamps:
Pull bumper back a little.







Disconnect plug connection for fog lamps and/or PDC on left/right.
Remove bumper.







Version with headlight cleaning system:
Pull bumper back a little:
Detach lock and disconnect hose connection.
Remove bumper.







Installation: The height of the bumper is adjusted by turning the socket head cap screw.







Ideal adjustment:
Distance (A) must be the same all around between the bumper and body cutout.
Dimension (A) = 5 ± 1 mm