Replacing Eject Box

Removing And Installing/Replacing Eject Box

If necessary, remove telephone from eject box.
Remove center console.







Unclip plug connections (1).
Release screws (2) and remove bracket (3).
Release cable tie and remove telephone wiring harness (4) from guides.

Installation Note Ensure correct cable routing.







Loosen screws (1).
Remove armrest (2).







Loosen screws (1).
Feed out cover (2) on lock and lift off.







Drive out pins (1) in direction of arrow.







Disconnect plug connection (1).
Lever out covers (2) and feed out telephone wiring harness (3).
Remove interface for telephone (4).

Installation Note Ensure correct cable routing.







Move function carrier in direction of arrow as far as it will go.
Unlock retaining hook.







Remove connecting cable for telephone from guides.
Move eject box (1) in direction of arrow and remove.