Removing and Installing Mechanism For Rear Glass Lid

54 10 030 Removing And Installing Mechanism For Rear Glass Lid

Necessary preliminary tasks:
- Remove complete glass slide/tilt sunroof
- Remove glass slide/tilt sunroof lid at rear
- Remove rear drip moulding
- Remove drive units with gearing

Overview of glass lid mechanism:







1 Floating roofliner mechanism
2 Mechanism, front glass lid
3 Drive wedge
4 Drive plate
5 Mechanism, rear glass lid
6 Control carriage, rear glass lid
7 Spring retainer
8 Drive cable, rear glass lid (connecting link)
9 Drive cable plate
10 Drive cable, front glass lid (connecting link)
11 Control carriage, wind deflector
12 Slide element

NOTE:
- Always replace mechanism for glass slide/tilt sunroof in pairs.
- If necessary, lightly grease guide channel.







NOTE: Drip moulding carrier cannot be removed without incurring damage.

Break out tabs with a screwdriver and lever out carrier.

Installation:
Replace drip moulding carrier and hook into place.







Slide front connecting link (1) towards rear past drive cable plate (2).
If front glass lid is installed, move mechanism with lid.







Lever out retaining bracket (1) from drive cable plate (2).







Slide rear connecting line (2) with drive cable plate (1) towards rear until spring retainer (3) is exposed.

NOTE: Spring retainer (3) cannot be removed without incurring damage.

Lever out spring retainer (3) with screwdriver.

Installation:
Replace faulty spring retainer.

Continue sliding rear connecting link (2) with drive cable plate (1) towards rear out of guide channel and remove in succession.







Installation:
Slide drive cable plate (1) up against drive cable.
Install locking lever (2) and lock retaining bracket.







Removing control carriage for wind deflector:

NOTE: Spring retainer (2) cannot be removed without incurring damage.

Lever out spring retainer (2) with screwdriver.

Installation:
Replace faulty spring retainer.

Pull control carriage (1) for wind deflector towards rear out of rail and remove.

NOTE:
- Check smooth and noise-free running of kinematics.
- Check function.