Removing and Installing/Replacing Slider Set For Floating Roofliner

54 10 070 Removing And Installing/Replacing Slider Set For Floating Roofliner

Necessary preliminary tasks:
- Remove glass slide/tilt sunroof
- Remove rear floating roofliner
- Remove fan grille
- Remove drive unit with gearing







Unclip end stops (1) on left and right from guide channel.

Installation:
Engage end stops at front and clip into place by applying pressure.







Carefully unclip slide block (1) on left and right (risk of damage).
Pull driver for rear floating roofliner (2) and slider set (3) towards rear out of guide.







Disengage rocker arm (1) from driver for rear floating roofliner (2).







Remove rocker arm (1) from rail and replace if necessary.