Replacing Actuating Device For Left Rear Seat Back-Rest

Removing And Installing/Replacing Actuating Device For Left Rear Seat Back-Rest (Through-Loader) (Touring)







Grasp finisher (1) for release lever from inside and pry out upward.







Installation:
Retaining straps (1) may not be damaged.







NOTE: Place cloth (1) over locking rod to prevent the rear seat back-rest from locking down.


Pry out actuating device (2) by pulling forwards and upwards.







Installation:
Locking tabs (1) on left/right sides (for finisher on actuating device) must not be damaged.
Locking tabs (2) at front and (3) back (for actuating device) must not be damaged.
Actuating rod (4) must be correctly mounted and should not be bent.