Mechanical Specifications

Tightening Specifications
Driveshaft Center Mount To Body 21 Nm
Output Shaft To Final Drive Flange:
Fillister Head Bolt:
Without Locking Teeth 83 Nm
With Locking Teeth:
M10 1) 96 Nm
M12 110 Nm
Torx Bolt:
Without Ribbed Teeth 83 Nm
With Ribbed Teeth:
8M 64 Nm
10M Colored Black 100 Nm
10M Colored Silver 2) 80 Nm
12M 135 Nm
Final Drive To Axle Carrier:
Front 100 Nm
Rear 165 Nm
Rear Axle Carrier With Rubber Mounts To Body:
M12 x 1.5 163 Nm
M14 x 1.5 140 Nm
Differential Case Covers:
M10 8.8 45 Nm
M10 10.9 90 Nm

1) Replace bolts and washers.
2) Replace screws.