Removing and Installing/Replacing Rear Drip Moulding

54 13 105 Removing And Installing/Replacing Rear Drip Moulding

Necessary preliminary tasks:
- Remove complete glass slide/tilt sunroof
- Remove glass slide/tilt sunroof lid at rear







Unlock tab (2) and remove drip moulding (1) towards top.

NOTE: 2 springs are loosely connected to guide for drip moulding.

Installation:
Make sure springs are reinstalled on drip moulding carriers.







Removing drip moulding carrier:

NOTE: Drip moulding carrier cannot be removed without incurring damage.

Break out tabs with a screwdriver and lever out carrier.

Installation:
Replace drip moulding carrier and hook into place.