Replacing Complete A/C Compressor

Removing And Installing/Replacing Complete A/C Compressor (M62)


CAUTION:
Risk of damage!
Follow instructions for compressor replacement without fail.


NOTE:
A/C system is drawn off.
Drain coolant.
Remove A/C compressor drive belt.
Remove intake filter housing.







Detach plastic tube (1) on shut-off valve and on pump and remove.
Release screws (2) and detach lines (3).

Installation Note: Replace sealing rings.







Detach water hose (1) from thermostat housing cover.







Disconnect plug connection (1)
Detach water hose (2) from radiator and remove Release screw (3) and detach mounting plate (4) from radiator.

Installation Note: Replace sealing rings.







NOTE: Cover frame rail in area of A/C compressor.


Disconnect plug connection (1).
Release screws (2) and lift out A/C compressor (3).







Replacement:
Release screws (1) and detach lines (2).

Installation Note: Replace sealing rings. Observe tightening torque, Pressure and suction lines to compressor 20 Nm.