Replacing Pulse Generator on Left Inlet Camshaft

Replacing Pulse Generator On Left Inlet Camshaft (M62)

Interrogate fault memory of DME control unit.
Switch off ignition.







Turn fasteners on acoustic cover 90° counterclockwise.
Remove acoustic cover.







Disconnect plug connection (1) on left cable strip.
Unclip cable from cable holder (2).
Release screw (3).
Remove pulse generator (4).

Installation Note: Coat sealing ring with anti-friction rubber coating (e.g. petroleum jelly).


NOTE:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Now clear the fault memory.