Replacing Pulse Generator (Output or Turbine Speed)

Replacing Pulse Generator (Output Or Turbine Speed)
Remove valve body.
Refer to 24 30 006





Impulse sensor for output speed:

Pull off plug (1).

Remove screws (2 and 3).

Installation:
Tightening torque, refer to Technical Data 24 34 4AZ





Lift off pulse sender.

Caution: Watch out for spacers (4 and 5).





Impulse sensor for turbine speed: Pull off plug (1). Remove screws (2 and 3).

Lift off pulse sender.

Installation:
Tightening torque, refer to Technical Data 24 34 4AZ