Installing Replacement Transmission (S5D 260Z/310Z)

Installing Replacement Transmission (S5D 260Z/310Z)

Note: After completion of work, check transmission oil level.

Important!:
^ Use only the approved gear oil in this manual transmission.
^ Failure to comply with this requirement will result in serious damage to the transmission.

Remove transmission.





Install breather (1) (see sticker).

Detach breather (1) and protective sleeve (2) from selector shaft.

Lever out sealing cap (3) and install breather (1).

Install release unit and release lever in new transmission.

Converting shift rod Joint:





Slide back locking sleeve/retaining ring (1).

Drive out straight pin (2).

Convert exhaust suspension.

Convert reversing light switch.