Maintenance: Service and Repair

Opening the Hood:

Caution: Never attempt to carry out service or repair operations on your vehicle if you do not have the required technical background. Always switch off the engine and allow it to cool down before working in the engine compartment. Always disconnect the battery before working on any electrical systems or equipment especially when these are located within the engine compartment. Comply with all applicable instructions and safety precautions. Failure to work in an informed, professional manner when servicing components and materials constitutes a safety hazard for vehicle occupants and other road users. If you are not familiar with official servicing procedures, please have the work performed by your BMW center.

To release:



Pull the lever located under the left-hand side of the instrument panel.

To open:



Press the release handle upward and open the hood.

To close:



Lower the front of the hood to within several inches of the lock, then allow it to fall of its own weight. Next, press both sides down simultaneously, continuing until you hear the detent mechanism engage.

Note: To avoid injuries, be sure that the travel path of the hood is clear when it is being closed, as with all closing procedures. If it is determined that the hood is not completely closed while driving, stop immediately and close it securely.